Serie-V Cople Sin Válvula Intercambio Snap-Tite H/IH (Rosca Hembra)

Atributos

Presión de Operación Máxima	6000 PSI (400 bar)
Peso	0.94 lb
Break Quantity	0
Paquete Opcional/Cantidad por Caja	1
Material	Acero
DE Máximo	1.99" (50.5 mm)
Rosca	Hembra NPTF
Tamaño de Cuerpo	1"
Rango de Temperatura	-40°F to 250°F (-40°C to 121°C)
Presión de Reventón	15900 PSI (1100 bar)
Medida de Rosca	1" - 11-1/2
Longitud	2.10" (53.3 mm)
Hex	1-13/16"

Detalles

Available Options

Contact Dixon for all available option adders
Standard seal options include: FKM, EPDM, Steam-EP, FDA FKM, Mil-Nitrile, Fuel Nitrile and Silicone
Kalrez® seal options include: 4079, 6375 and 7075
Valve options include: Unvalved, tubular, steel, brass and 316 stainless steel
Sleeve options include: Sleeve-lock, Flanged and Silicone-flanged
Oxy-clean treatment is available

Compatibility & Interchange Data

Interchangeable to MIL-C-51234
Snap-Tite H and Faster TNV

Construction

Machined components are manufactured using solid bar stock
Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Steel coupler sleeves are hardened to resist deformation and maximize service life.
Nitrile (Nitrile Rubber) seals are standard
All couplers incorporate a PTFE anti-extrusion ring to protect the seal components from dynamic impulse damage.

Features

General purpose hydraulic quick-connect provides superior flow characteristics with built-in reliability

Note

Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation.

Recursos