Imagen

2740606CBC - Conexiones Push-On Hembra NPTF x Barbas para Manguera

Dixon Distributor? 

Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.

Atributos

Peso
0.065 lb
Break Quantity
0
Paquete Opcional/Cantidad por Caja
0
Material
Latón
Material de Componentes
Tapa de latón
Rosca Hembra
NPTF
Rango de Temperatura
-40°F to 150°F (-40°C to 65.6°C)
Longitud
1.66"
DI de Manguera
3/8"
Hex
3/4"
Valor de Presión
350 PSI
Tamaño de Rosca Hembra
3/8"-18

Detalles

Construction

Dryseal

Installation

  • Assembly Instructions:
  • 1. Trim hose end with smooth square cut.
  • 2. Lubricate either push-on fitting, hose or both.
  • 3. Insert push-on fitting into hose until first barb is in hose.
  • 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

  • Disassembly instructions:
  • 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
  • 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Note

No hose clamps or ferrules are needed

Safety Notes

  • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

Specifications

  • Number of Barbs: 2
  • Barb Length: .92"
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.

Recursos