Material Safety Data Sheet
Ball seat type
unknown | es
Imagen
2780808C - Conexiones Push-On Hembra NPSM Giratoria x Barbas para Manguera (Asiento de Bola)
Dixon Distributor?
Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.
Atributos
| Peso |
0.122 lb
|
|---|---|
| Break Quantity |
0
|
| Paquete Opcional/Cantidad por Caja |
0
|
| Material |
Latón
|
| Material de Componentes |
Tapa de plástico amarillo
|
| Rosca Hembra |
NPSM
|
| Rango de Temperatura |
-40°F to 150°F (-40°C to 65.6°C)
|
| Longitud |
1.89"
|
| DI de Manguera |
1/2"
|
| Hex |
15/16"
|
| Valor de Presión | |
| Tamaño de Rosca Hembra |
1/2"-14
|
Detalles
Construction
Installation
- Assembly Instructions:
- 1. Trim hose end with smooth square cut.
- 2. Lubricate either push-on fitting, hose or both.
- 3. Insert push-on fitting into hose until first barb is in hose.
- 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.
Instructions
- Disassembly instructions:
- 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
- 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.
Note
No hose clamps or ferrules are needed
Safety Notes
- Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
- Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
Specifications
- Number of Barbs: 2
- Barb Length: 1.02"
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Recursos
Material Safety Data Sheet
Imagen
Product Literature
Imagen
Product Literature
Catalog Page
Imagen
Learning Video
