Catalog Page
Manufactured from CA 360, CA 345 or CA377 brass
unknown | en
Image
Dixon Distributor?
Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.
Attributes
| Weight |
0.06 lb
|
|---|---|
| Break Quantity |
0
|
| Optional Package/Box Quantity |
0
|
| Material |
Brass
|
| Thread |
Straight
|
| Tube Size |
3/8"
|
| Working Pressure |
1000 PSI
|
| Temperature Range |
-65°F to 250°F (-54°C to 121°C)
|
| Thread Size |
5/8"-18
|
| Hex |
3/4"
|
Details
Construction
Features
- Economical fitting resists mechanical pullout
- Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection
Installation
- Cut tubing squarely and clean tube end thoroughly to remove burrs.
- Place nut onto tube. Place threaded end of nut toward end of tube.
- Flare tube end with flaring tool to provide 45° flare.
- Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for metal-to-metal seal.
Note
Flare tools are available, please contact Dixon for pricing and availability.
Safety Notes
- The PSI rating given is based on a temperature of 73°F (23°C) using copper tubing.
- Temperature and type of tubing used are important factors in working pressure ranges.
Specifications
- Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards).
- Short nut may be used when vibration is minimal
- Reference SAE 010110
Use
- Manufactured especially for hard-to-hold liquids and gases
- Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
